Tweet
I will get out there and take some closer pics. I used square tubing and welded them to the inside of the center frame. I welded a piece of angle from one tubing to another. I'll get some pics.
I started to weld 3/4 inch angle to the top of the frame to hold aluminum flooring. Decided to try something different so I would not have to fight the floor to get to the chains and adjusters. I went to junk yard and found a truck bed liner. Cut it out to my dimensions. The bed liner is really strong and light weight. you can pull it right up and have access to chains.
I started to weld 3/4 inch angle to the top of the frame to hold aluminum flooring. Decided to try something different so I would not have to fight the floor to get to the chains and adjusters. I went to junk yard and found a truck bed liner. Cut it out to my dimensions. The bed liner is really strong and light weight. you can pull it right up and have access to chains.