Quote:
Originally Posted by boncrshr
Hey Racer,
The T-20 re-seal kit is about 30 bucks...so provided there are no hard parts damaged, it is a cheap fix. For bearings, I would highly recommend Buffalo Bearing 716-874-1721. Mine were very reasonable, plus they are triple sealed!
As far as your other questions...others may have some better suggestions than me. Good luck, does not sound like your rebuild will cost too much.
|
For sure give Buffalo Bearing a call and tell them that Jeff, the guy with all of the 6 wheelers sent you and they will take real good care of you. You can have them cross reference the Fafnir part number RA100RRB and get less expensive import bearings which I have had good luck with. I would probably get a double or tripple sealed bearing if you will be taking it in the water. If you're doing this machine right, you would be extremely impressed if you added Whipper's 1 1/4" axle upgrade as well.