As an avid boater, I can say that the work on one is NEVER done. I am beginnig to wonder if an anphib is the same. Anyway, went to start it yesterday, and the starter barely turned the motor over once, couldn't get any more out of it. Checked for loose wires or damaged connections, but nothing. Battery was about dead. After pulling the starter for a little bit, (BOY, does that get old, FAST!) and putting a voltmeter to the battery with it running, I see that the battery is not being charged! I am trying to figure out what the problem is. I did find that both the fuses are blown! Of course, they are a quite unusual design, one that I have never seen before! But I found a great substitute!
Get 5x20 fuses (looks like small AGC fuses), take the end caps off the OLD fuses, and press them onto the new 5x20 fuses, over their endcaps. they fit snug, and the lenght becomes the same, and they fit like factory, nice and tight! I will see if this was my only problem, or if something else caused them to blow! (Thank you, Don, for all your help so far!)
