Never owned one out to 1000 hours but I've sold some of my used ones at 400+ hours and I trusted them as much as the day I bought them. Maintenance is key. My newest one with 38 hours was a mess...
Type: Posts; User: AlaskaGrizzly
Never owned one out to 1000 hours but I've sold some of my used ones at 400+ hours and I trusted them as much as the day I bought them. Maintenance is key. My newest one with 38 hours was a mess...
My suggesting on the question about the retaining clip is to get the serial number and go to "argo manuals" on argoadventure.com and look up the parts manual for that serial number. They have all...
The old style runamuks swim pretty good. Keep an eye out for used ones?
5 hp maximum on the motor. I've had a 10 or 15 hp that belonged to a friend (can't remember exact hp) on my argo and it...
I've heard they are making the old goodyear runamuk again if you have a machine with the 22" tires. Just looked them up on Amazon and they are $96 each. The new argo tires swim good but they are...
I'll second the seal driver. They are handy. If you have a big enough vice and some soft jaws for a socket or the seal driver that's just the right size does good for pressing them in.
My jury...
I have gone to carrying my guns in a waterproof soft case. Here is a brand that is a nice option.
https://nomaralaska.com/products/waterproof-rifle-scabbard
I don't believe you should run escargo tracks without tuners. Because of the design of that style tracks the center tires and track speed don't match. Check out the AK Buzz video on youtuve "argo...
I have not dealt with many burnt out stators but it sounds like yours is not producing the required voltage for the regulator to produce the DC output. The one I dealt with was on a 4 wheeler. When...
I know someone who is going install air vents similar to the Argo brand heater vents in his Avenger dash/firewall and hook them up to 3" bildge blowers (inline fans) to blow air from the engine...
Yes if your engine power supply is still good you can remove the accessory alternator.
I was able to locate the Denso part number and purchased a new Denso for a lot less then the Argo price in the past. Also had a friend buy a "knockoff" brand that matched up to the Denso part number...
Reason I do it is because is I was told that this is suggested for running tracks and I believe I confirmed it in the Argo track instructions. It avoids getting "chain wind up" with tracks where the...
My guess right now is you have a tire (or tires) that are larger circumference on left. They travel farther every revolution and make you pull (or rather push) to the right.
Making sure all are...
I believe guards part #606-42 showed up in the early 2000 conquests. I can't remember for sure but I think my 2003 had them and my 2000 did not. I bought them and put them on the one that did not...
Replace rusty chains and clean up the ones that are not rusted and re-lube them is my recommendation. But you might be able just clean the rusty ones and lube them too You might be able to get some...
If you put a new bearing in it's best to install new seals too.
Your blocking looks good. That's what I do.
Bearings should have no play. I've run bearings with some play for a while before replacing them but I kept a close eye on them so I did not end up...
You should be able to judge how much of a bead lock it has by the shape of it from the outside. I'm betting the white rims won't be as deep or defined as the Argo rim. Not that they won't serve you...
http://www.6x6world.com/gallery/data/512/medium/IMG_3176.JPG
If you are into building things you can make your own bead breaker for removing tires. I built this out of a couple pry bars after...
The black ones are factory rims from what I see. You can tell the bead lock feature from the outside. On your picture the step that the tire mounts on (1" mark on your tape) there will be a "U"...