Sections
Recent Forum PostsMy Briggs has both, and I am quite spoiled on the electric start. I only use the boss for recreational/hunting purposes though. As the members touched on, if you intend to race, all that extra... 
I jumped up to a 7/16 bolt from 3/8. Bought a 11mm drill bit that was one thousands undersized, then drilled both axles and sprockets and reamed hole slightly. Bolt is very tight fit. Mic your bolt...
I'm an electrician and if you know any electricians they'll tell you they hate running conduit, but they're good at it. I've been eyeing up some 1/2" emt planning on bending a nice oval loop that...
Use grade 5 bolts. The more ductile/soft material absorbs shock whereas the harder Grade 8 bolts tend to break under shock load. Grade 8 also wears the axle and sprocket hubs instead of the bolt.
...
The adapters would have to be thick enough to recess the 5-lug studs, since they'd otherwise hit the backside of the rims, and you'd have to recess the back of the 4 studs so they aren't against the...
Currently Active Users
Betton Industries Ltd. out of Streetsville Ontario manufactured this 4x4 two stroke ATV called the Bee-Line Bee-4
Latest Poll