You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
I don't think I would use that bearing. I would get one with a locking color and an r3 designation in the part number. This r3 tells you it's triple sealed and will hold up to our application.
I have been working on changing bearings on my 97 max iv and took the mid bearing out and with me to the bearing shop here in town. after i put it in i looked at it and it appears that the old...
Anyone else running 2 strokes adjusting your oil/fuel ratios?
10% ethanol in our fuel must make a difference with the burn.
What about running avgas or adding octane boost?
My oil guy says its ok...
Sections
Recent Forum Posts
Currently Active Users
6x6 World Sponsors
I don't think I would use that bearing. I would...
I don't think I would use that bearing. I would get one with a locking color and an r3 designation in the part number. This r3 tells you it's triple sealed and will hold up to our application.
amphibious drew 05-25-2013, 01:52 AM