You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
The grips that came with my Avenger are to thick/large for my small hands (I'm 5-3) and are quite hard. After a five hour drive on the tundra today my hands just but had enough.
I'd like to replace...
They are at that. They are just for looks. I did put one on my conquest. and all I had to do is mod the mount a little, I hit a power snow bank and bent it.:hmmmm2: They are not built very strong at...
Either a c-clip holds it down, or there is a hold down bracket over the diamond shifter. Then just wiggle it and pull up while doing so. If you have neither, it's most likely just moved up and needs...
Here is a Jiger owners manual for dealers only including operating instructions and a parts list for the Jiger amphibious ATV that was manufactured in Ontario, Canada starting in the 1960s.
(Click on thumbnails for a larger view)
Sections
Recent Forum Posts
Currently Active Users
6x6 World Sponsors
Latest Poll
Avenger hand grips are thick and hard... any good replacement grips you like?
The grips that came with my Avenger are to thick/large for my small hands (I'm 5-3) and are quite hard. After a five hour drive on the tundra today my hands just but had enough.
Rusty-Gunn 06-19-2013, 04:29 AMI'd like to replace...