Forum: Engines

hi new here i have a jlo 440 in a maxIV i got the engine running then recoil broke i put starter on it now it wont run has spark new plugs 120...

Ok guys, here is the build to deal with how to adapt a snow machine clutch to the flex plate. You will need 1. a good machinest machinest 2....

I have used flex pipe on cars for a quick repair works ok except I only get 3 or 4 months tops out of it. My question is how does it hold up on an...

Hello, My Argo has been sitting for 8 months under a tarp out of the weather but after starting it up it needs some choke on to run well. I...

I got my carb problem sorted out, she is idling and revving ok, running on both cylinders. When I put it into gear and try to move the machine...

Hey all, I got a buggy with a JLO Rockwell 2F400-2 with none of the wiring hooked up. I have attempted to hook up the wiring but not all the colors...

Hi, I have just dug out an old conquest which has been lying under a cover for 5 years. It only has 295 hours on it, which for over here is very...

Hye guys. I was wondering if there is going to be an issue with upgrading my fuel lines. Origionally there were 1/4" lines to and from the tank....

i got a jlo that seems to have spark then looses it then comes back. anyone know what it might be loose wire points not adjusted right. its in a...

:hmmmm2: I've been working with this machine for the past year. Last season we used it pretty hard and had no issues. This season I've been having...

Looking to upgrade to electric choke. Does anyone know if someone sells a kit for small engines? Looking for motor and butterfly that I can...

Hey guys. I am trying to better understand the role of the rectifier and see if it is possible to upgrade due to the increased lighting I am...

Anybody got a source for gasket and seal sets,piston and ring sets for the original motor.NCT

I recently purchased a sierra trail boss. It has a polaris engine with dual carbs and it is also a pull start. I dont know how big the engine is so...

Ok guys, the carb I was given for my jlo has flanges that are too small for the intake. My intake requires 74.6mm distance from center to center on...

Well i got this 6x6 from my brother for $500 and it needs a little help as the title says. First the exhaust is just too loud and needs to be quieted...

Anyone have any problems with valve seats getting loose? I used to build 5 hp briggs flat head for racing and valve seats were an issue. Used...