New members, introduce yourself here

[jiger46]

Hello all!! im new to this site and new to the 6 wheeler world my names Tyler and i recently purchased a breton versatrek jiger. and having trouble rebuilding my axles! wondering if anyone would know anything about these machines. Thanks

[Mike]

Hi Tyler, welcome to the site and congratulations on your recent purchase. Try starting a thread in the "Other AATVs" section of the site and someone may be able to help you out if you have some specific questions.

[jpswift1]

Hello all!! im new to this site and new to the 6 wheeler world my names Tyler and i recently purchased a breton versatrek jiger. and having trouble rebuilding my axles! wondering if anyone would know anything about these machines. Thanks

Try Jiger ATV Vehicle

That's a great Jiger site with just about everything you would need to know about them. Welcome aboard!

[Rustyfritz]

Hello all. My name is Russ. Very new to the world of 6x6's. Always wanted one for deer hunting here on the eastern shore of Maryland. So recently I purchased a pretty ragged 89 max II with the intentions of rebuilding the whole machine. So far the process has been going ok. Fully disassembled everything. Frame off. Sand blasted and coated the frame in Por-15. It's going slow but I'm on to rebuilding the t-20 right now. I'm sure this site will help me with my needs ad questions.

[Dave Smith]

Welcome Russ. You're right about this site. I've been rebuilding my Max and the information I've gleened from here has been extremely useful. Not only relative to the Max, but other machines and the hobby in general. These guys are a wealth of knowledge and humor, and more than willing to help.

[LarryW]

Welcome to the site Russ! Thanks for the introduction and congrats on your new Max. Sounds like its going to be one clean machine when your done!

[pinz]

Hi All

I am a newbie from the UK and as part of my job I have just started to look after 4 Argo's . Untill about 3 months ago I had never heard of them let along driven one , repairing them has been a steep lurning curve but enjoyable. I have already picked up loads of info from this site , but i am sure i will be needing to ask a lot of questions . Great site thanks .

[Mike]

Hi pinz, welcome to the forums.

[fesser]

Hello all, Newbie from Napa, California. Never saw a 6 wheeler inperson until last week when I bought a Hustler (950 I believe) basket case. Had been stored exposed to the elements for years and will probably need everything worked over. Since I know NOTHING about these machines I will probably be asking lots of stupid questions. I've already answered many questions by reading posts on this site. Thanks, Frank

[amphibious drew]

That is the whitest hustler I have ever seen. Use a heat gun on low to try and bring back that nice brown. Welcome aboard and good luck on your build.