Search:

I looked at the Hydro Traxx but it is to wide for the trails and the operating RPM range is around 3,600, very loud but is a very tough machine, just doe not appeal to me

I owned a Argo 8x8 Avenger and loved it but,,, I sold the machine 2 years ago because I got tired of constantly replacing axle bearings (yes I greased them) and the slack adjusters on the chains were...

You can get detailed info on correct tire pressure, size placement ect from a Argo dealer

Hey matt,

Are you using the same bearings as the argo?

I have a 2 stroke GM 2 cylinder diesel with a blower in my Allis Chalmers cat. It will run pretty hard and turn some high RPM's. This thing was built in 1955. I know this thing would not work for you...

After talking with Matt and some others that have had the pleasure of trying one of these I have decided to look at one purchase. Can't do it till I sell the Avenger. Anyone interested in a 04' that...

I spoke with Matt about the Muddox on the phone the other night and it is obvious that the builder of the machine, Matt and his family are very passionate about the Muddox and they believe in the...

:hmmmm2:Akexpress: These new machines seem to be the hydrostatic that I am looking for, however I cannot get past the main page on the muddox site. Can you post some contact info so I can get some...

Looking for 6x6 or 8x8's owners in Cowlitz, lewis or Skamania counties to ride with

My new top is made out of roll bar tubing, 10 pt cage with the aluminum skin off of a canopy.Thinking of soft top jeep style doors. Make sure you protect your noggin

I took a aluminum canopy apart and used all the parts to build a top. I had 1/4" plywood doors. Nice and cozy inside in the worst weather till I rolled it into the Toutle river by Mt. St. Helens in...

I used a fan out of a computer tower and made a box out of tin and a shop vac attachment to blow hot air on the windshield from the engine compartment. The fan does not blow very hard but it works.

I put a universal wiper unit in my Avenger. Cost me about 50 bucks and all I had to do was take out the plug in the middle of the windshield and wire it and she works great. Call Mary at Points west...

Hey Gibba,

I hate it when that happens! I encounter the same problem time to time. Check your tire pressure and brake adjustment. Just when you think you got those brakes adjusted correctly she...

I put the new style chain tensioners on the chains for the 2nd set of axles back. I noticed they have alot bigger teeth. They also ratchet up tight also, but not as bad as the old ones. As far as the...

Thank you for the welcome Mudbug. Taking the machine out tomorrow, I will try to figure out how to get some pics up:hello:

Rock doctor thank you for the welcome. My Avenger is a 04' and I have done alot of work to it in the last year. Inner and outer bearings on 3 axles, welded up muffler twice now, built new idler...

This is a common problem in the Argos. Premature bearing failure is mainly caused by the chains being too tight thus putting a heavy side load on the bearing and of course mud and debris.I have...

:adore:Love this sight! I saw the Argos in Alaska and had to have one, so I started saving for 5 years and picked up a 04' Avenger in 05' and I love this thing. I live by Mt.St. Helens Wa and love to...