You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
Hi,
I have a problem periodically with my clutch in my 2003 Max II (23 hp Kohler). By times when I release the throttle the clutch remains engaged even though the engine is at an idle. The machine creeps forward and sometimes will stall. If I pull the sticks back and rev it a couple of times sometimes it will release. Also sometimes when the clutch is sticking and when I shut off you will hear it make a loud clunking sound as it releases. Upon restart after that clunking sound it is released. Everything looks good in there and revving it it appears to be working properly.
The belt I am using is a Gates I believe P/N 6314 and a cross for that is a Dayco HP3003. I am thinking perhaps the belt is sticking down in the clutch or not sliding to the top of the split pulley on the transmission input. Also when checking the clutch I saw very minor corrosion on the front pulley which I sanded with 200 grit emery cloth. I am wondering if closer to the shaft is corrosion causing the belt to stick.
Remove the clutch and the outer cover. It probably has a broken spring or roller arm. Parts available possibly from Quality Drive Systems. I can’t locate the number right now.
In your opinion would this be the primary (engine) or secondary (transmission ) assembly? I have a fair amount of some types of wrenching experience but clutches, transmissions baffle me. What manufacture clutch would be in a 2003 Max II with a 23 hp Kohler engine? Thanks.
Trying to rationalize how the clutch works it would seem that in order for the machine to creep at an idle (again only by times) that the primary (engine) would have to be the one sticking. Would this sound reasonable?