Welcome to 6x6 World, the premiere website for Amphibious ATVs. Come join our family friendly forums, browse the member submitted photo gallery, thumb through brochures, and check out the how-to section. Argo, Max, Attex, Hustler, Terra Tiger, Mudd-Ox, and more 6x6 and 8x8 amphibious ATVs are inside!
-
Easy T-20 split shifter Guide
- Created by: Rabbit929
- Published: 10-31-2016, 03:36 PM
- 0 comments
Easy T-20 split shifter Guide
This is on a 94 Max II 18hp Briggs and Stratton You will need: Grinder Welder I got all my parts from tractor supply. Parts List: -1/2x1x2 inch steel bushing (anything will work but the inside diameter needs to be 1/2in) -1/2in steel pipe (hollow or solid, you only need about a foot) -shift knob of your choosing, I haven't found a matching one yet. -2 1/2in inside diameter spacers/washers (the think ones) Start by cutting the cross shaft. I cut mine an inch and a half from the ... -
- 0 comments
-
- 0 comments
Hoot Owners Manual
A downloadable PDF of the Hoot 6x6 Owner's Manual from Knox Outdoor Products:
... -
Pressure lubricating a Max throttle cable
- Created by: MAX IV Mark
- 0 comments
Pressure lubricating a Max throttle cable
Every time I go to start my Max in winter the throttle cable is frozen. I have a heated throttle cable but it takes about 20 min idling to get it free. I figured a good way to lube, purge the water and keep it from freezing.
I took a condiment squeeze bottle I had laying around and filled it with antifreeze. You could put your own mixture in it if you are worried about using antifreeze.
Removed the engine cover to get at the cable end. This engine is the 29 Kawasaki... -
- 0 comments
Argo Service Manual
Below you will find PDF downloads of sections of the Argo Service Manual. This manual is Argo part number 673-04-1 from 2006. It covers a variety of Argo 6x6 and 8x8 ATVs manufactured since 1992 including the Conquest, Response, Bigfoot, Vanguard, Vanguard 2 and the Avenger.
...General Information Engine Electrical Brake / Steering -
- 0 comments
Whitman Robinson Scat
Brochures on the Whitman & Robinson Scat six wheeler. The brochure mentions that the Whitman & Robinson company were manufacturers of a popular 4WD tractor called the Cayuga.
... -
- 0 comments
Cat-A-Gator Manuals
Here is a service and parts manual for the Cat-A-Gator 6x6 and 8x8 amphibious ATVs. It is in PDF format: Cat-A-Gator Manual -
- 0 comments
Cat-A-Gator Brochures
Some brochures and literature on the Cat-A-Gator 6x6 and 8x8 amphibious ATVs:
This brochure is a two sided fold out brochure detailing the Cat-A-Gator:
A single page front/back brochure with some Cat-A-Gator specifications:
A magazine ad for the Cat-A-Gator:
Be sure to check the manual section for the Cat-A-Gator Service Manual... -
- 0 comments
Power-Dyne Hawk Hi Torq
Here are a couple of brochures on the Power-Dyne Hawk Hi Torq 6x6 ATV. Be sure to check out the optional "Power Fins" on the specifications page that claims speeds in the water of up to 6MPH. There is also an article on Power-Dyne Vehicles, Inc that was located in Pawtucket RI detailing their filing with the SEC for an IPO.
... -
T-20 Assembly video
- Created by: George
- Published: 09-26-2012, 04:59 PM
- 0 comments
T-20 Assembly video
This video walks you through the assembly of a Borg Warner Skid Steer T20 transmission.
...
There are no articles in this category.
Please log in to your account to view your subscribed posts.
Categories
Collapse
article_tags
Collapse
- 4x4 (1)
- 6x6 (2)
- amphibious (4)
- attex (1)
- atv (3)
- buyers (1)
- buying (1)
- download (2)
- gotcha (1)
- guide (1)
- hustler (1)
- industries (1)
- inspection (1)
- manual (3)
- max (1)
- operator (2)
- operators (1)
- owner (2)
- owners (2)
- parts (4)
- purchase (1)
- recreatives (1)
- superchief (1)
- truck (1)
- utv (1)
Latest Articles
Collapse
-
by Rabbit929This is on a 94 Max II 18hp Briggs and Stratton You will need: Grinder Welder I got all my parts from tractor supply. Parts List: -1/2x1x2 inch steel bushing (anything will work but the inside diameter needs to be 1/2in) -1/2in steel pipe (hollow or solid, you only need about a foot) -shift knob of your choosing, I haven't found a matching one yet. -2 1/2in inside diameter spacers/washers (the think ones) Start by cutting the cross shaft. I cut mine an inch and a half from the ...
-
Channel: Transmissions
10-31-2016, 05:36 PM -
-
by MAX IV MarkEvery time I go to start my Max in winter the throttle cable is frozen. I have a heated throttle cable but it takes about 20 min idling to get it free. I figured a good way to lube, purge the water and keep it from freezing.
I took a condiment squeeze bottle I had laying around and filled it with antifreeze. You could put your own mixture in it if you are worried about using antifreeze.
Removed the engine cover to get at the cable end. This engine is the 29 Kawasaki...-
Channel: Engines
01-01-2014, 12:32 AM -
-
by MikeBelow you will find PDF downloads of sections of the Argo Service Manual. This manual is Argo part number 673-04-1 from 2006. It covers a variety of Argo 6x6 and 8x8 ATVs manufactured since 1992 including the Conquest, Response, Bigfoot, Vanguard, Vanguard 2 and the Avenger.
...General Information Engine Electrical Brake / Steering -
Channel: Argo
04-19-2013, 05:37 PM -