trailering argo with top up

[Mr. Moose]

l use a 4 x 5 ' sheet of 1/4" plywood....5' horizontally and drill a hole on each btm corner so the holes will fit a ratchet end..... l attach end to my brush guard[home made with angle iron 2" above the brush guard]......tighten down....i use a heavy duty strap and tighten to my brush guard and then put strap over the cover and attach to my hitch and tighten......l have not expierenced any problems at all....l have driven 90kms an hour with wind from all directions....take note my top is homemaded and is solid....make sure is tight and try at low speeds at first.....good luck....

[plott hound]

do you have a picture of this set up of yours?????????