Question on Conquest Axle Bearings/Seals

[BigMerv]

Need to know what bearing numbers will fit this. I have the ARGO P/N, but those are just repackaged NTN bearings. I can get high-quality bearings and seals locally on the cheap, I just need numbers for inner bearing, outer bearing, and axle seal to X-reference.

Thanks a bunch for any replies. BBJ

[Dan67]

Just after I bought my 2000 Conquest I needed to replace all the bearings and chains in it and I did quite a bit of digging and created a quick text document and recorded it for any future needs..

Axle Bearing Information

Outer Bearing (stock): Part#101-35 = UC206-20 (12 total, 8 axles + 4 idler shafts)
Inner Bearing (stock): Part#101-41 = UCX05-16 (8 total)

Seal (stock): Part#102-14 = CR12361 1.25 x 1.75 x 0.188 (8 total)
Seal (stock): Part#102-15 = CR12379 1.25 x 1.874 x 0.25 (8 total)


I actually got better prices on the seals from my local Argo dealer then buying form other sources. $1.50 vs $5 each. For the bearings, hard to beat Buffalo Bearings. All my bearing where ordered as R3 for triple lip sealing. Outer for about $12, and inner for about $8 each. You can call Buffalo Bearing at 1-800-669-8019. Hope this helps out.