Argo Questions

[Toys4Me]

Picked up a 6x6 Vanguard with 16hp vanguard and have some questions. Numbers from the tub are.
Serial No. SN8181 Model No. V697-55

Looking for some specifics on machine in regards to year(he wasn't positive said either 94 or 96)... Also looking for belt numbers, bearing numbers and which chain tensioners I need. Printing all the service manuals now.

[ARGOJIM]

It's a 95, Argo bearing numbers are 101-35 and 101-41, 1-1/4 is a UC206-20 think the 1 inch in UC206-18 but check that, def. need UC206 bearings. Good luck with it.

[Toys4Me]

Which seals do I need for the housing?

[Dan67]

Which seals do I need for the housing?

Its the same as my 2000 Conquest.
Axle Bearing Information

Outer Bearing (stock): Part#101-35 = UC206-20
Inner Bearing (stock): Part#101-41 = UCX05-16

Seal (stock): Part#102-14 = CR12361 1.25x1.75x0.188
Seal (stock): Part#102-15 = CR12379 1.25x1.874x0.25

Flange Assembly (stock): Part#605-97 (includes both seals)

You can call Buffalo Bearings, they have the bearings and seals. 1-800-669-8019

[Toys4Me]

I'm missing the snap clip on the master link for the idler chain. Is that a 40-2 chain?

[ARGOJIM]

Trans chains are 40-2