Tweet
Has anyone mounted an avenger brush guard on a conquest?
-
-
I tried matching a bent one up, you would have to change all mounting points and it may stick out further.sigpic
My new beer holder spilled some on the trails - in it's hair and down it's throat.
Joe Camel never does that.
Advice is free, it's the application that costs. -
thanks Jim. I wasn't sure if the overall "shape" really matched up to the body very well.Comment
-
Buzz it semi follows it, the overall machine is as close as it gets but there is a slight contour diff., the Avenger and Frontier lean back and down from the center and the Conquest is straighter overall, also the Conquest is more rounded than the newer bodies.sigpic
My new beer holder spilled some on the trails - in it's hair and down it's throat.
Joe Camel never does that.
Advice is free, it's the application that costs.Comment
-
Mat be easier to get some round tubing, a conduit bender, a 30 pack and a friend with a welder to make a contoured one, the Conquest ones were much straighter and plainer than the current ones.sigpic
My new beer holder spilled some on the trails - in it's hair and down it's throat.
Joe Camel never does that.
Advice is free, it's the application that costs.Comment
-
The more you get into that 30 pack the more things look more curvy. Real curvy. Just ask the guys at the bar come Friday night.Originally posted by ARGOJIM View Post
Stand for the Flag. Kneel for the Cross.Comment
-
Well hopefully he'll have the right goggles on.sigpic
My new beer holder spilled some on the trails - in it's hair and down it's throat.
Joe Camel never does that.
Advice is free, it's the application that costs.Comment
-
I'd like to see pics of this project.Stand for the Flag. Kneel for the Cross.Comment
-
If I would have to buy another brush guard for my avenger I would go with ARGOJIM. Make your own. To me those avenger brush guard are just cheap crap. They don't protect the head lights and are too weak.JackComment
-
always a good excuse for a project. Time is free and beer is cheap. I have noticed multiple machines break the "tabs" that secure the factory brushguard on the corners....and bend the brushguards in.Comment
-
Originally posted by brebett View Post
They are at that. They are just for looks. I did put one on my conquest. and all I had to do is mod the mount a little, I hit a power snow bank and bent it.
They are not built very strong at all. Argojim has the right 
Comment
Comment