Tweet
due to a broken weld on the shifter the trans wasnt "fully"in high range.this is the carnage.most of teeth off input shaft,damage to other gears.
-
You never know till you try it
-
loose shifter
almost forgot the offending shifterYou never know till you try it -
OUCH! That looks expensive. Have you gotten the new gear clusters yet?Comment
-
not yet,going to try a 2stroke trans,will be test driving next weekend.i expect it to be slower,time will tellYou never know till you try itComment
-
Hmmm ,,that looks familar,,I was lucky all my Gears were in Good shape,,just the left output shaft was bad,(which my son fixed at school) and I replaced all the bearings, seals,,reverse Idler Bushing.
When I called for parts,,,they mentioned that one of the gear shafts out of the BigFoot trans was about $300.00,,,,Good Luck on the trans and Parts !,,,MarkComment
-
2 stroke trans is in,(modelH)seems a bit slower on top end than the orig.(modelGSS)but it is useable for now
You never know till you try itComment
-
Do you need the whole trans or can you get away with just the input shaft?sigpic
My new beer holder spilled some on the trails - in it's hair and down it's throat.
Joe Camel never does that.
Advice is free, it's the application that costs.Comment
Comment