How thick is the steel in a floor pan. My bigfoots floor pan is wrecked from rust and I'm going to lay a new piece over it and mig it to the frame rails. I don't want to put something to thick in and make the frame to rigid. I know a few guys on here have redone frames so hoping Someone might know. Thanks!
Announcement
Collapse
No announcement yet.
Quick question on floor pan
Collapse
X
-
The entire frame is 11Ga., if you have no plans of doing a complete rebuild at this time you may want to let it be until your ready and do it right. Welding the frame out of square may be worse.sigpic
My new beer holder spilled some on the trails - in it's hair and down it's throat.
Joe Camel never does that.
Advice is free, it's the application that costs.
Comment
-
Good to know. Thanks guys. I don't think the frame is out of square. I did a Couple diagonal measurements and from what I can tell the cross members and remaining floor on the front and back and keeping things together. But I think a tear down might be the better solution. See what kind of time I can devout over the winter.fbCoderson75
Antigonish, NS
1998 bigfoot 18hp vanguard
Comment
Comment