Tweet
Has anyone put a simple roll bar on an 8x8? I do not want the full ROPS cage but just a simple roll bar.
Would love some pictures if you have done this.
Scott
Would love some pictures if you have done this.
Scott
-
-
I'm going to build one like the Razor has but haven't decided how to mount yet. Check out a Razor they have a good design that can easily work on an Avenger. Guys are putting lexan with a 6-7 inch horizontal space at face level for a partial windshield and it works really good for protection and vision. Windshield is attached to roll bar with zap straps and I've seen roll overs with no problems. -
I used a 2001 Kawasaki Mule rollcage, removed the back shield and cross member, ground off junk not needed and bent bars out some to weld to 1-1/2x2 angle. Tweaking with some lights and braces. Not as fancy as razr, but the razr i measured would never stretch enough to go across my Bigfoot. They are also short in the front. This project is underway as we I type. When finished, I’ll try to post a pic.Last edited by bilimrl1; 03-11-2015, 09:21 AM.Comment
-
Simple Argo Rollbar
This is more what I was thinking of http://i300.photobucket.com/albums/n...psbwh5glip.jpgComment
-
That is the 6 wheeler roll bar/ light bar.sigpic
My new beer holder spilled some on the trails - in it's hair and down it's throat.
Joe Camel never does that.
Advice is free, it's the application that costs.Comment
Comment