Announcement

Collapse
No announcement yet.

sprokets

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    This is the exact set up on mine!

    Comment


    • #17
      My Argo has the 24 tooth on the inside,that's what's wrong i got it finally! Lol took this long to figure out that I had the speaker on the wrong end of the axle

      Comment


      • #18
        I think the setup is different. The chains are on different sides then mine

        Comment


        • #19
          Well then as stated run them the other way, as long as they match. There is a misprint in some of the Magnum catalogs.
          sigpic

          My new beer holder spilled some on the trails - in it's hair and down it's throat.
          Joe Camel never does that.

          Advice is free, it's the application that costs.

          Comment


          • #20
            So putting them inside or outside won't hurt anything?

            Comment


            • #21
              Just be sure the chains stagger.
              sigpic

              My new beer holder spilled some on the trails - in it's hair and down it's throat.
              Joe Camel never does that.

              Advice is free, it's the application that costs.

              Comment


              • #22
                This picture shows your 70 piece chains on the outside. It's your picture.

                sigpic

                My new beer holder spilled some on the trails - in it's hair and down it's throat.
                Joe Camel never does that.

                Advice is free, it's the application that costs.

                Comment


                • #23
                  I have all my 24 on the inside,what sprokets are a mid chain or 70p chain made for 19 and 24?

                  Comment


                  • #24
                    Except my mid chain,that is the 24 to the idler shaft

                    Comment

                    Working...
                    X