hey all you argo people. im sure all of you have had a bad stuck sometime in your life? post a pic or tell the story of it,dying to hear some hunting trip stories
I got stuck in a small creek otherwise known as the Colorado River in Texas outside Robert Lee (a town with one light). I had gone down the river in my Tan Max 2, then when coming upstream got high centered in a silt pile and couldn't unstick it. I figured I could just push off the bottom and work the sticks and throttle with my hands. Once I jumped in, I sunk down in basically quicksand. Luckily for me, I was able to grab the middle tire and eventually pulled my body out, but managed to lose my shoes and socks, and pants, and underwear in the process. I did manage to fish the undies out and wash out the silt well enough to get them back on to walk back to my deer camp. Luckily I was the only person in the camp, otherwise would have never heard the end of it. Once back in camp, I dressed again, grabbed a come-along and walked back to the creek, and found a rock pile to walk over to the machine on, cabled it up, and attached to a oak root, and winched her out. Once out, I was whipped, took the machine back to camp and had a few beverages as I thought that process out about taking a machine out without a winch. That weekend there was a new winch mounted to her, and I've had the same machine now 21 years later.
no doubt,how did you guys get that avenger out? any damage done?
I was not there, it was a friend who works out in the bush, I believe they sent a helicopter out to retrieve that one. Can't really tell in the pics, but there is a steepish hill on one side of the bridge, and it was wet out. The machine slid down the hill, out of control and ended up as you see it :-)
I got stuck in a small creek otherwise known as the Colorado River in Texas outside Robert Lee (a town with one light). I had gone down the river in my Tan Max 2, then when coming upstream got high centered in a silt pile and couldn't unstick it. I figured I could just push off the bottom and work the sticks and throttle with my hands. Once I jumped in, I sunk down in basically quicksand. Luckily for me, I was able to grab the middle tire and eventually pulled my body out, but managed to lose my shoes and socks, and pants, and underwear in the process. I did manage to fish the undies out and wash out the silt well enough to get them back on to walk back to my deer camp. Luckily I was the only person in the camp, otherwise would have never heard the end of it. Once back in camp, I dressed again, grabbed a come-along and walked back to the creek, and found a rock pile to walk over to the machine on, cabled it up, and attached to a oak root, and winched her out. Once out, I was whipped, took the machine back to camp and had a few beverages as I thought that process out about taking a machine out without a winch. That weekend there was a new winch mounted to her, and I've had the same machine now 21 years later.
Wow Noel, that's some story. Yes good thing the guys weren't at camp lol.
What it lacks in ground clearance it makes up for with traction.
My worst stuck was out ice fishing one day. I drove about a half mile out onto the lake. I knew the snow was deep. Once I stopped and got out I sank up above my knees. A foot of snow with a foot of slush hidden underneath. When I went to leave I feathered the throttle as not to break through the snow pack. Well it didn't work, the tracks on my Max IV were churning slush as the tub was high centered on the snow. I shoveled and shoveled underneath but could not get back up on the snow pack. I had a winch and an ice auger but nothing to lodge in a hole to winch from. Nothing! Not even back at the truck. This happened on aMonday morning so there was no one in sight. Being 3 hours from home I had no one to call. So I called the local police station to see if he knew of anyone and he put me in touch with s friend of his. After a short phone call he showed up on his snowmobile with a sheet of plywood and a high lift jack. I signaled him when to stop before the slush got bad. We waded through the slop and made a ramp with the ply wood and jacked up the front put the plywood under the tracks. It worked, I was able to drive up the ramp and get on top of the slop. I broke through one more time. After the same procedure I made it to shore. This guy was a perfect stranger and left work to help me out. He said all he wanted was 20 bucks for the plywood. Well I gave him way more than that after he said no once or ten times. Finally he took it for a donation to the local fire dept. I sure meet some nice people in my travels. By the time I loaded up the frozen Max my bibs were froze solid from above my knees down. Lol. Really hard to move.
Solution, since this fiasco I've added cleats to the tracks, a rear winch, and most important of all, I made an ice anchor to winch from.
What it lacks in ground clearance it makes up for with traction.
I got stuck in a small creek otherwise known as the Colorado River in Texas outside Robert Lee (a town with one light). I had gone down the river in my Tan Max 2, then when coming upstream got high centered in a silt pile and couldn't unstick it. I figured I could just push off the bottom and work the sticks and throttle with my hands. Once I jumped in, I sunk down in basically quicksand. Luckily for me, I was able to grab the middle tire and eventually pulled my body out, but managed to lose my shoes and socks, and pants, and underwear in the process. I did manage to fish the undies out and wash out the silt well enough to get them back on to walk back to my deer camp. Luckily I was the only person in the camp, otherwise would have never heard the end of it. Once back in camp, I dressed again, grabbed a come-along and walked back to the creek, and found a rock pile to walk over to the machine on, cabled it up, and attached to a oak root, and winched her out. Once out, I was whipped, took the machine back to camp and had a few beverages as I thought that process out about taking a machine out without a winch. That weekend there was a new winch mounted to her, and I've had the same machine now 21 years later.
My 1st AATV was a basket case Argo Vanguard 6x6. After a bunch of hours fixing it up I was impatient to get out for a ride and ended up going alone. I got a bit high sided in some ruts and started working the laterals vigorously. This was the result....My left lateral in my hand and no longer attahed to my Argo lol. I spent the next 20 minutes getting unstuck and trying to figue out how to get home making only right hand turns.
The solution was simple in the end, a pair of vise grips provided me with a left side foot brake.
Here is another crappy day pic, we were coyote hunting a property north of Bellville, it was cold and my truck was quite a few miles away. Luckily I had a heavy weight hunting partner who was able to hang off the back left side of my Max as a counter weight to stop the front right from scrapping along the grond and digging in crossing a few gullies. We tossed the tire in the back and the track on the roof and hobbled out at a snails pace.
My worst stuck involved a hole in Busco, a Buffalo that didn't like it 3 times and a nice gentleman named Jim on a night,night ride.
I was stuck pretty good, and that's all I have to say about that.
I'm sure a photo may surface at some point.
sigpic
My new beer holder spilled some on the trails - in it's hair and down it's throat.
Joe Camel never does that.
Comment