Announcement

Collapse
No announcement yet.

What to Do? Repair or Give Up

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • What to Do? Repair or Give Up

    I recently purchased a 1989 Magnum 8x8. Vehicle has new 22hp Kawasaki engine, new chains, gears, and tensioners, new clutch assembly, new tires and rims, and some other new parts (gauges, etc.) I replaced the battery and installed a new 5K winch just in time for opening weekend of deer season. We hunt in the salt marshes/swampy forests of South Dorchester County, Md. The terrain is pretty rough, The trails are often under water and cut through forest filled with dead fall, ruts, and humps.

    On the first trip out, my super track on one side broke. It wasn't the rod that broke, it was the "hinged channels"??? that the rod slips through to link the segments that split, allowing the segments to come apart with the pin still through one of the segments. I had a spare segment and swapped it out. In the process, found another that was tearing and swapped it out with my last spare segment. The next day, a segment on the other track split.

    Tracks are a required accessory for our terrain. My dilemma is this: Do I:

    1) bite the bullet, order new tracks, and keep this machine (throwing a hunk of change into it), or
    2) sell the unit without tracks (taking a financial hit), cut my losses, and try and purchase a brand new machine - not really an affordable option.

    Because of health concerns, my hunting is severely limited without access to an argo.

    I'd love to get some thought or comments from some seasoned Argo owners who may have been down this road themselves

  • #2
    Go with option #3, get a set of Adair tracks. They will shame the super tracks.

    Comment


    • #3
      It seems the thing to do is figure out why your tracks are tearing up. How old are the tracks? I don't have experience with tracks but I think the conversation on this site will lead to questions of track tension, tire type, chain windup, etc. Perhaps you can elaborate on these topics.

      Comment


      • #4
        These tracks have more than likely been UV damaged by being left outside during off season (summer) I had two sets of these in the past with no issues but have seen that situation on a friends machine that left them lay out behind the shed when not in use he replaced a few segments before giving up and replacing his tracks completely, your decision has to be a financial position decision buying a used set of anything is a risk putting more money in a older machine is a option if choking down the large investment of new is out certainly the purchase of a new track system is the least costly I believe you are beating your head against the wall to continue on with the tracks you currently have,there are options out there in the track world and plenty of info on this site from people that run tracks year round to the occasional user more than enough information for you to make a choice.Cheers NCT

        Comment


        • #5
          Originally posted by Noel Woods View Post
          Go with option #3, get a set of Adair tracks. They will shame the super tracks.
          YES, if you can afford new tracks,the best option for the needs you mention is Adair tracks. Rubber tracks are for snow and the Adairs are known to be the best in mud and they swim.

          Comment


          • #6
            If the hinge knuckles are worn flat to with in 1/8" of the pin the tracks are at the end of there life and will continue to beak at the most inopertune times. My suggestion is a set of adairs that could be added to if you ever wanted to install on a newer one with the 10" wide tires.

            Comment


            • #7
              there are some other discussions and such regarding the chanel tracks. also seem to be great tracks at a very good price. johnboy

              Comment


              • #8
                ask people who have argos where you live what works for them. And, ask them whether or not they have tried all the different types and about the conditions they drive in.
                Different track styles could potentiallly help or hurt you, and $$ cost is a huge factor. In the end you just want them to work and not cause you problems. Or you'll be pissed.
                That's the advice I give people in Alaska.
                Regarding your machine, just know that you can always use a set of tracks you have now (for 10" wide tires) on a different machine (even much newer) if it also has 10" tires.
                Some tracks are easier than others to adjust or modify for varying levels of performance

                I'm usually nicer than this, but...argo plastic tracks are horrible tracks in most every way. No offense to anyone

                Comment


                • #9
                  I don't disagree with the position Buzz has taken not many on this site have had the experience with so many different designs and uses for me they are only for snow as I have near zero requirement for them at any other time and will chime in this I currently have the Argo rubber track system and although absolutely luv them for snow use they are tough on the drive system and the older the drive/axle style Argo the harder they would be it is a art form to keep tire sizes and diameters correct in varying weather throughout the winter to minimize drive-train issues and doubt that they would be the cats meow in deep bog as there is nowhere for the mud to go other than out the sides for snow they have been great not slippery on side hills no complaints there something where other styles appear to look like skates but for the costs and my degree of use its not feasible to buy two or three different tracks to try not unlike most people so sort thru the posts the truth is out there pick the ones with the guys that have tried a wide variety in different environments and the one that closely mirrors your own.NCT

                  Comment


                  • #10
                    As others have stated plastic tracks are ok for going on snow alone, but in bog, swamped out trails, water + snow etc you want adair or some other kind of channel track. They do it all. I have Argo plastic tracks right now but If I had the money, Adair is what I would buy. I'd leave them on all the time and never have to buy tires either... LOL
                    "I've yet to encounter a problem that cannot be solved with the right mixture of whiskey and weaponry"
                    :ME....


                    " From my cold dead hands"
                    :Charlton Heston...

                    Comment


                    • #11
                      If you are crossing a lot of dead fall a metal crosser will work better for you. If your main usage is pure bog or peanut butter mud Adairs have the edge. I assume you are in the USA, look to the Canadian track guys if price is the driving factor, you get around 30% off with the dollar and they sometimes have a sale in late winter. Another option is to buy a little more modern AATV that does not carry the huge price tag of new. Happy Hunting!!!

                      Comment


                      • #12
                        If you feel comfortable with the reliability and performance of your machine after all your upgrades I would keep it and get either some adair or chanel tracks. These will outperform the supertracks by a wide margin especially in the swamp. If you do end up eventually upgrading to a newer machine both these tracks can be modified (lengthened or shortened) to fit that machine. I had supertracks and now run chanels and the durability and performance are not even close.

                        Comment


                        • #13
                          Thanks to everyone for their help. I am going to stick with this current machine and order new tracks as soon as the holidays are over. I do need some minor welding work done (new shelf for the battery and some reinforcements for the front frame to protect everything from damage when using the winch). I am looking for a rubber headlight bezel (rectangular) for this 1989 Magnum 8x8 if anyone has one.

                          Excited to finally have reached a decision.

                          Comment


                          • #14
                            Just a thought for you to consider, member deedeelin has a Set of Adair's for sale in NC that would fit if you have 22's and his machine is 2002 or older.
                            sigpic

                            My new beer holder spilled some on the trails - in it's hair and down it's throat.
                            Joe Camel never does that.

                            Advice is free, it's the application that costs.

                            Comment


                            • #15
                              I decided to keep my Argo and ordered new tracks from Rick's Relics (TruTrax) and I couldn't be happier with them, or the transaction. I can recommend them to anyone. I am sorting through some performance issues including a significant sluggishness when I need power at the low end to turn or climb. It works fine in reverse, slightly less than ok in low, and poorly under strain in high. I am thinking fuel related or carb related. I also need to weld in a new battery pan and upgrade the supports on the front frame to handle the winch without tearing the tub. Super excited to complete everything and hit the swamps.

                              Thanks for the great advice so far.

                              Greg

                              Comment

                              Working...
                              X