Argo Throttle

[jamvan72]

Hey guys. I have a mid 80's 8x8 Argo with the 17HP Kohler engine . I am in the process of replacing the carburetor but its been a while since I took the old one off so naturally I have forgotten how it came apart. Im also wondering if I have lost any linkage, Would anyone out there have the same machine and be able to take a picture of their throttle linkage and choke and send them to me ???? Ive looked online but I can't find any clear pictures that are the same hookup as the Argo. Thanks

[curtisbyrne]

https://drive.google.com/file/d/0B6dar38RLIxALVJvX3k2UGx0SkE/view

this is for the M-18 SAME ENGINE JUST NEWER! page 42-51 should help and pg 56-67 should help with linkages! dont have a pic on me now thought i did but the manual should help. bookmark the manual for future reference!

[argojosh]

http://imgur.com/a/Z4Vak

This is for a KT17, I hope it helps

[jamvan72]

Thanks Gentlemen. Helped immensely

[Pike]

Don't mean to hijack your thread put I have somewhat the issue. I have a 2012 750 HDi, my throttle cable frayed at the end and broke off, I have a new cable but not sure where to attach it on the linkage.
Almost at the same time my alternator belt went on me. Apparently there is a connector for the regulator somewhere under the air filter to attach in the case where there is no alternator. If someone has a similar machine I would appreciate a picture of the throttle connection and regulator attachment. Thanks guys.