Tweet
Does anyone know any tricks to get better braking out of the old Argo (about 74 model). Ive sanded and cleaned the discs and pads with brake cleaner, but I still feel that it ought to brake (turn) better. It seems to turn best when cold ( the first few turns) and after a dozen turns or so, it seems like it doesn't respond near as well. Thanks
-
Last edited by doccerny; 09-13-2008, 02:53 PM. -
Hi doccerny
I am guessing they are mechanical brakes, check to make sure you have the proper clearance between the pads and the disc. If the clearance is too tight your discs will quickly overheat. Make sure you are not riding the breakes. -
Yip, they are the old mechanical brakes and the clearance could be the problem. I have them pretty close to cut down on my long lever travel, my levers are 4 1/2 ft. tall.Comment
-
if i can get this to work!!here is adjustment of 92 vangaurd mech. brakes.it will get you in the right direction.the pads begin apliying in a v(wide to front,if oppisite the pad will break!!(dont ask)
well that wont work,files too big.will have too Email to ya,PM me your addy
Last edited by ArgoGirb67; 09-15-2008, 07:04 PM.You never know till you try it
Comment
-
-
Did you get anywhere with the braking issue?Comment
Comment