Anyone have a machine apart right now?

[ARGOJIM]

Ok fellas I'm currently in the process of redoing a 6 I/C which is a Kohler powered manual brake machine, this machine was bought incomplete which I was fine with.
My current issue is the powerpack was one of those missing items and perhaps the most needed item to create some sort of original functionality.

So what I am looking for is measurements for either a K series, Twin series or early Vanguard series powerpack. If there is a couple pictures with the tape measure showing the important parts, I can make something new. I have a Tec powerpack that is adjusted and mounted differently so I need some measurements.

Part numbers 611-60 (K that is missing) 611-33( Twin or early Vanguard), 611-41 (Vanguard) are preferred and sought after.
I may be able to do something with 611-50, 611-57, and 611-65 so any measure ments of the downward mounting eared powerpacks will help.

Thanks in advance, Jim

If anyone has one for sale that may work depending on what it is.

[curtisbyrne]

have an 85 8 ic power pack out right now will get measurements tomorrow

[curtisbyrne]

this is what i have might be hard to see but its what your looking for

[ARGOJIM]

Yes Curtis, that will get me close, that is for the upper hyd braked machine but the lower measurements should be close.

I'd be looking for;
overall length
measurement to downward ears from rear and forward attaching points.
length/depth of the ears and slots
the engine plate measurements allow me to use the M18 I have now

well, pretty much everything would be best. I guess I could make a K(a) instead of a K or KB

Thanks, Jim

[ARGOJIM]

Any luck there Curtis?
Jim

[bigfootbob]

check out this link jim it maybe of some interest to you.

https://www.kijiji.ca/v-atv-parts-trailer-accessories/city-of-toronto/argo-transmission/1321967413?enableSearchNavigationFlag=true

[ARGOJIM]

Thanks Bob,
That's from a newer machine with a different frame, like Magnum( probably), V2, Bigfoot, Response, Conquest style.