Almost there...just electrical

[Northernbush]

Thank you all for the wealth of information. I'm hooking up the last of the wiring and I'm kinda lost. My '82 with Tecumseh was mostly intact but wiring was a mess and missing. What is the proper way to hook up these parts in the pics. Maybe I'm missing some smaller pieces. Pics couldn't load. I am referring to the box on side of the engine cover... regulator (2 yellow wires and black wire. The other issue is the wiring next to it. I believe it to be coil or stator. It has 2 yellow and a red wire.

[Northernbush]

[IMG][/IMG]

[Northernbush]

IMG_20190222_193446.jpgIMG_20190222_193548.jpg

[wildmanargo]

Ive got the same motor sitting on my work bench. its a plug at the end of that. If I remember ill try to get some pictures.

[Northernbush]

Just wondering if there is any small parts to the system... other than a fuse.

[ARGOJIM]

Looks like you are missing a couple 3 plug in ends, the yellow go to each other, the red is battery charge, black is ignition shut down.
Your Argo parts manual should tell the rest.

[Northernbush]

Thanks for the help. Read so much, got confused. Should be able to start it up in the next while. Bearings and tires next.

[ARGOJIM]

Thanks for the help. Read so much, got confused. Should be able to start it up in the next while. Bearings and tires next.

I probably worded my reply wrong, there would be 3 2 prong plugs , 2 with yellows going to yellows and then a separate plug with black and red feeding machine.