2017 frontier clutch alignment

[bigfootbob]

i noticed my motor mounts loose on my 2017 frontier with the kohler command pro motor.
you can shift the motor slightly by hand and i am wondering on any tips to tigten the motor so that its aligned properly with the driven clutch.

[ARGOJIM]

Engine and trans should not go out of adjustment as they are not adjustable, however there was an issue about 17 with studs breaking so check that they are just loose.

[bigfootbob]

thanks argo jim.
i am thinking if i just tighten them up then it will be aligned. Not sure about the studs I see in the parts manual its 4 carrier bolts holding the motor down. I will get a light down in there and check for any studs or cracked mounts.