Whats the value 8X8 Conquest

[DC571]

I am currently looking at getting a new Argo. This would be my first Argo, so I would like to get some input from the forum. So my question to you is what would you pay for this unit. Thanks.

8x8 Argo conquest 1998 or 1999
Kawasaki liquid cooled motor.
91 hrs
3000lb super winch
18in plastic track
Bilge pump
Skid plate
Outboard motor mount
Cloth pop up duck blind
Aluminum/plexy glass enclosure (pictured)

Agro was stored in a heated shop.

[magger]

10-13 k would be going price in my area, low hours great top, looks to be in good shape interested as to what the bearings and engine condition are in. was this used for a buisness? or personal use?

[DC571]

It belongs to a man in town so personal use. I have heard it run and it sounds great. Bearings im not so sure about. What does it cost for new ones? Also is that enclosure made by argo? He said it was but the ones they offer now appear to be a cloth/plastic cover.

[artist1018]

It belongs to a man in town so personal use. I have heard it run and it sounds great. Bearings im not so sure about. What does it cost for new ones? Also is that enclosure made by argo? He said it was but the ones they offer now appear to be a cloth/plastic cover.

NOT an Argo/ODG option enclosure!! It might have been a dealer made product, totally different "animal" all together!
Bearings are available from several tractor supply stores, just check thier quality vs. one from ODG.

[Rumbles]

$8000 to $10,000 tops, anymore would be just wrong. Whats he asking for it?

[DC571]

Registered Rider

He said 7,000 will take it home

[lewis]

What are your plans for the machine? Hunting,fishing or just trail riding?

[DC571]

Register Rider

Prairy dog hunting,ice fishing,coyote hunting,deer hunting and maybe duck hunting.

[magger]

if you could afford 7 g's, well then its only money !i hesitated twice on two different machines and kiked my a$$ for it i payed 4000 and invested at least 3 to get mine where it is,and at 91 hrs i would buy buy buy!!!p.s mine has 640 hours of witch i only put on 5 hrs so far , cheers!!

[lewis]

Then this would fit you usage. One the tracks are worth about 2,200 if the are new or in good shape around 1,000. The Atgo cover is about 1,500 to 1,700 this is all U.S. dollars(This is not a Argo cover but a very nice looking cover and would suit you needs very nicely). Skid plate around 350.00 and wench your guess is as good as mine, don't know the brand. If the machine is in good shape and just by looking at the seat covers from a distance they look to be in good shape. Trans, motor, bearings, clutches should not be hurt with 91 hours on the machine. I now have 145 hours on my Avenger. Remember the machine is now 10 or almost ten years old, but... if the time meter is correct and not tampered with 10 hours a year is all it has been used and that is not bad. I know the exchange rate is different there but i seems to be a decent price for the machine.

As always remember buyer beware. Look through the site at previous checks for the bearings, clutches and assorted items. We probably need to start a thread for this type of subject.

Hope this helps!

[Rumbles]

He said 7,000 will take it home

take it out for a good ride, pull the floor pans, look at the chains and tensioners, (don't forget the two chains to the front axle) wiggle the wheels, check the engine coolant and oil. Run the motor for a while and make sure there is no smoke and then buy it. At $7000 if you would have to put a few bucks into it it's still a good buy.