Can anyone tell me a # for argo bearings

[gus marrone]

I need to replace the outer bearings on my 1988 Argo 6x6 and would like to get them from my local bearing house. Thanks for the help

[benrich]

Argo Bearings

I might be able to help you with that I have some new bearings for my 95 vanguard. let me round them up and i will post the numbers to you.

[JohnF]

In this post I describe the bearings for a 1998 (and I believe all) conquest. The outer and idler bearings are the 1.25 inch bearings and the inner bearings are 1 inch.

I do not know the bearing for a 1988 but the Buffalo Bearings guy that I talked to on the phone has a lot of experience with bearings on amphibious vehicles and convinced me that triple sealed is the way to go for the outer bearings. His number is in the above linked post.

[mike bar]

I have a 1990 magnum with 1.25 splined shafts and use AMCAN SA206-20G they will range from $9-$12

[akpride]

bearings

Running to the bearing store now and my 01 bigfoot uses outer bearing
manufature: IDC select

P/N: UC 206-20G

Hope that helps I get mine for $14 a piece In alaska

[gus marrone]

bearing

Thanks for the help, I'll try calling him.