newbie questions

[gizzmo]

Ok, I'll start with I'm not sure what year my argo is I assume its 81-84 ish its simalar to evil argo but scoop is diffrent anyways the guy I bought it from i think screwed me it has no floor just plywood and the engine was converted to a b/s 16hp with hydraulic brakes so its not original and the trans I found out is really old t20 but the fluid is clean. I realized I needed new bearings after 1000$ worth of tires and they cut the tub middle ways of the cab so to make engine replacement easier. My questions are can you replace to floor back to original and where do i find the parts and will the tub split hurt the integrity of the body and it makes a terible noise once the trans clutch kicks in I tried lube of all kinds and nothing works its really loud but it don't do it in reverse. Oh whats a good price on chain and bearing I figure since I have three bearings bad I might go ahead and replace all chain and that reminds me I got it stuck in the snow and only one side was engaging and I pull that brake and the otherside worked I pulled it out with my wheeler and it seem to be fine anything I should be concerned with. thanks for any help.
Joe

[thebuggyman1]

Hi Joe, A picture is worth 1000 words. Take a few and post them so we can see exactly what you mean. Or you could do a walk around video, the audio could describe the problems. Good luck.