Post pics of your Argo Atvs!

[CarlR]

I'm new to the forums, but have enjoyed my Argo for a couple of years now. It's a 2011 Avenger HDI, well equipped with alternator, bilge, winch front and rear, 18" rubber tracks, heater, aluminum top, LED lights front and rear, even a couple of dome lights so I'm not blind in the middle of the dark night! Mainly use it to access our cabin here in Utah. Planning to buy a 2nd 8x8 so a couple of families can get in without round-tripping.

http://www.carlrichey.com/argo/img_0090.jpg

http://www.carlrichey.com/argo/img_0128.jpg

http://www.carlrichey.com/argo/img_0094.jpg

http://www.carlrichey.com/argo/img_0176.jpg

https://www.youtube.com/watch?v=VhhN5YXhawk

Looking forward to sharing my Argo adventures/questions with you!

[Alsuwaidi_a]

Hi , My name is Ateeq Alsuwaidi , From Abu Dhabi , UAE , am a member from few months , this is my first post , I have ARGO 750HDI , with pro series track , a video of my ARGO , ( from 0:55 sec) I use my ARGO in salt water , been using it for around 2 years and it is great , thinking to buy another one but with Galvanized frame and metal parts

the video from my youtube channel .

video was taken by DJI phantom 4 pro + as a test

this forum is the most helpful site that i have found for 6x6 and 8x8 thank you

[Mike]

Great shots with the Phantom. That's a good looking Argo as well. What causes the circular sand patterns?

[Alsuwaidi_a]

I knew somebody will ask about it, it is made for sea water circulation for mangrove trees , it hold the sea water when high tide , to help mangrove grows , they planted more than 100,000 in area , and these circle help by keeping the sea water in low tide , you can see the mangrove trees in some shots

[Noel Woods]

For those that don't know, the UAE is a major ally of the U.S. and supporter in the middle east. Welcome Alsuwaidi a, It looks like you have some excellent riding conditions there.

[BFresh]

Hello I'm new to the forum, couldn't post in the introduction thread but I just got a 99 Argo Bigfoot 6x6 from my grandfather a few months ago. I custom made some led headlights for it, added a frontier brush guard, rear hand rails, 3000lb SuperWinch, Hardline tach and raised the governor to 4080rpm. Next I plan on adding some wider rims with Vampire ASX tires in 26x13-12 for this swampy mud down here in south Mississippi.

[ARGOJIM]

That's a clean looking Bigfoot there, the guard works on it pretty good. Post up what lights you used as they could be helpful for someone needing replacements. The slightly bent stick shows she's been stuck more than once.

Welcome, have fun with it.

[hydromike]

That Frontier guard really dresses up the front of your Bigfoot. The lights are a great touch, too. Welcome to the forum.... go have fun.

[john swenson]

ateeq, thanks for the video ...nice machine and what a cool place to ride !! welcome to the 6x6 world family. johnboy va.

[BFresh]

Thanks for the compliments! I used MicTuning MT-CHCR20 led lights off amazon. Had to remove the metal end caps and reseal the sides cause they wouldn't fit right with them on, then I cut some black plastic strips to fill in the small side gaps. Took a lot of macgyvering but they came out pretty good and they're super bright.

[dirtdobber]

Welcome Bfresh. Glad to have another Mississippi member here. Good looking machine.

[alain]

scut st 2017

IMG_0659.jpgIMG_0660 (4).jpgIMG_0662.jpgIMG_0657.jpgIMG_0658 (2).jpgMy first argo frontier ''scout st '' 2017

[Mike]

That is a heck of a first Argo. I like it! Tell us about the rollover protection.

[GarrettDaw]

[ATTACH=CONFIG]16408[/ATTACH][ATTACH=CONFIG]16407[/ATTACH][ATTACH=CONFIG]16406[/ATTACH][ATTACH=CONFIG]16409[/ATTACH][ATTACH=CONFIG]16410[/ATTACH] My first experience taking Testogen and argo frontier ''scout st '' 2017

Awesome!

[mowbizz]

Finally got my windshield and top installed and have some ice auger holders on the way from amazon. Here's my 2016 Argo Frontier Scout!