Can anyone measure the distance from outside to outside of a 1995 conquest with Standard argo tracks installed. I have a 5 foot trailer and am thinking of getting tracks. I want to make sure it will fit before I buy.
Announcement
Collapse
No announcement yet.
Conquest width with tracks
Collapse
X
-
I have a 2001 Conquest 6x6. I use 22" runamuks with the std Argo alum axle extensions for the 18" supertracks. Note on my workbench say's " Conquest w/ tracks = 71" wide ". It is currently sitting in my garage with this set-up for winter. I will try to get out today or tomorrow and re-measure but as of now I'll stick w/ the 71" dim. I believe one would subtract aprox 6" from total width if running 12" wide tracks.
Joe.sigpic
Comment
-
Let's look at it another way.. hehe. Take your conquest without the spacers, which you don't use with the narrow tracks. All you have is the track guide wrapping around the runamuk, so that adds an inch or so of track sticking out each side. I think the rubber skirt of the body band is 59" wide, and the runamuks w/o tracks are less than that.To Invent, you need a good imagination and a pile of junk. (Thomas Edison)
Comment
-
If your referring to argo's "standard" track, they are actually 13" wide...the "super" track is 2.5" wider on each side and does require the 2.5" axle extention (or wheel spacer)
With the standard tracks it will be 61" wide and will just squeez through a 5 foot opening, as the tires will give enough to move in about a 1/2" relatively easy.
The "true tracks" are a little narrower than argo's standard tracks and they do probably measure about 12"
Hope this helps a little
Comment
Comment