Tweet
where is the best (cheapest) place to buy the bearing and seals, is there somewhere offers it has a kit?
-
-
Hi IR,
You can check out Points West argo or even beaverdamargo.com
Hope you find what you are looking for. If you do not have a copy of the manual for your 02 conquest let me know. I have the same machine and have the manual and I could send you an electronic copy.
GuyfoxEven if you’re on the right track, you’ll get run over if you just sit there.
—Will Rogers -
Thanks for the info. I downloaded the parts manuel is there another one?Comment
-
There is an operators manual as well as the parts manual. Talks about mainentence schedule and things like that...normal operators manual...I have both in electronic form if you want either one.Even if you’re on the right track, you’ll get run over if you just sit there.
—Will RogersComment
-
Argo offers a Kit to upgrade to the new HDI Assemblies, I don't think it's what you want.Originally posted by IslandRunner View Post
Argo will sell you all the parts you do want, but I dislike their choice of the cheapest bearings available, at a high price.
The "cheapest" way to go will be to find the Bearing and Seal Part #'s (Several threads here will give you the part #'s), and take those to a Bearing Supply Store. I don't know what they have for dealers in Louisiana, but around here it would be something like "BC Bearing", "BDI Bearings", "Canadian Bearings", "NTN Bearing Corp", ect.
I would like a copy of those if you're offering. I had them, but that Laptop crashed on me a while ago.Originally posted by guyfox View Post
kakeays@hotmail.com
RDComment
-
I will go out on a limb here and say my best luck has been with rnp 1030,s made across the pond in England available at most brg places,cheapest they are not but apparently last longer,now I have to duck incoming volley from B.C.LOL N.C.TComment
-
I would like a copy of those if you're offering. I had them, but that Laptop crashed on me a while ago.
RD,
Manuals sent.
guyfoxEven if you’re on the right track, you’ll get run over if you just sit there.
—Will RogersComment
-
-
I only got my machine last year. The bearings and seals are fine for now.....Originally posted by IslandRunner View PostEven if you’re on the right track, you’ll get run over if you just sit there.
—Will RogersComment
-
beaverdam argo has access to those manuals as well on their website.,Comment
-
IROriginally posted by IslandRunner View Post
PM me your e mail and I can send them to you. Or if you want you can search for them on beaverdam argo. I do not have a problem to send them to you.
GuyfoxEven if you’re on the right track, you’ll get run over if you just sit there.
—Will RogersComment
-
Thank You, If I can help you out in some way to return the favor, just let me know.Originally posted by guyfox View Post
RDComment
-
ok, so i started today and pulled my rear left axle to get my numbers on the bearing, going to call a bearing supply shop tomorrow. took me about 30 mins. to get the axle out. had to heat it up and beat on it for a little while. my only question right now does anyone have any tips for the front two axles by the engine, looks like its going to be a nightmare.Comment
-
had the same problem, didn't want to use heat because of the HDPE tub, went to NAPA and got some (knock'er loose) sprayed on and let set over night to soak in, then took 2 pipe wrenches and worked back and forth and it came loose. some really good stuffComment
-
I Am now the owner of a 2002 conquest myself
Bearing are outer stock # 101-35... is a uc206-20
inner # 101-41 ucx05-16
seals are 102-14 cr12361
102-15 cr12379
The bearings prices are from $5 to $90 It will depend on what you are willing to pay Just remember that you get what you pay.
You buy cheep and you get cheep. I went for the twenty $ bearing. Argos are about $45
Same as a snow cat If you abuse them you pay. They are meant to be used not abused.Comment
Comment