Tweet
why does my argo make a sreeching noise when going forward and a popping noise when turning, it sounds like its comeing from the chains. how can i fix it. my argo is a 1980 6x6.
-
Last edited by Mike; 02-06-2012, 07:58 PM. Reason: moved post from introduction thread to the proper forum -
Make sure the chains are well lubed. Also you should have proper adjustment in them -
put on new chain. The other is probably stretched and wore out.
SlimSlimpickin
You can follow but it's going to hurtComment
-
Be sure to check your inside bearings as well as outside bearings. Make sure they are lubed well. If you jack up the machine and grab each tire and pull up and down, you shouldn't get much movement. If you do you probably have a bad bearingComment
Comment