Brake Plunger Adjustment on Conquest

[amacdone]

Hello, first time post long time lurker. The levers on my conquest brake unevenly, the right stick has to be pressed into my thigh while turning making it hard to steer and maintain even throttle. I don't have a service manual but am pretty sure the plungers can be adjusted to even them out? Does anybody know how I could get this done?

[guyfox]

You can check out beaverdam argo and look for the manual on that site....If you are having trouble finding it then pm me your e mail and I can send you a copy via pdf file.....What year is your machine.....

[amacdone]

Thanks, I found the service manual on the site you suggested. Seems like a fairly simple procedure.

[guyfox]

Hope everything works out for you and you can enjoy your machine....

[akpride]

I overhauled my brakes on my Bigfoot last fall. I would recommend buying the rebuild kit. Also a good time to flush the system, make sure you use the dot 5 brake fluid. I took the whole system out of the Argo that made it a lot easier to take apart. On the calipers be sure to check for pitting and clean any corrosion you can once you have it apart for seal replacement. If you have more questions let me know.