3 questions on SC

[ARGOJIM]

900 series clutches stock?

Mikuni from G50B work ok on G44B or is it to fat?

Have no muffler, will it affect performance and or hurt engine with out the Attex muffler?

Have a 44 that I can't remember if it's good or needing crank seals, want to put it in (well, it's in) to shake down machine and find a direction to go. Was putting a vangaurd in till I found out how much Sandy deposited in it and engine height is an issue.

[Don]

I think they came with a Salsbury 910

Carburetor (30 or 32mm) will work fine on a G44B- you could go bigger if you wanted

You won't be able to hear after about 5 minutes, and most likely performance will suffer.

Good Luck!

[ARGOJIM]

Thanks Don, you're quick.
Didn't mean with no muffler at all though, just not correct as I don't have one.

[Don]

The stock Attex muffler doesn't get the best out of the Chaparral, but it is quieter than the sled mufflers. I probably have one to spare if you want to go that route.