My 208tt

[bigmandengo]

I have one that even the 1/2 of the hub, the back 1/2 are slideable...when you apply the pressure of tightening the balloon tire, it presses the back 1/2 of the hub to the bearing collar

The hubs on my colt are like this too

[LarryW]

Ok, checked my old square tubes with 7/8ths inch axles and there lugs are 3/8" fine with a 9/16th nylon lock nuts.

Steve, I dont know 2nd gen machines at all so unsure of your sliding hub.

[Amphiman1]

attex

Ok, checked my old square tubes with 7/8ths inch axles and there lugs are 3/8" fine with a 9/16th nylon lock nuts.

Steve, I dont know 2nd gen machines at all so unsure of your sliding hub.

Mine are first generation.... baker hills i sold all the rest.....

[arm08kn]

Turns out the lugs are 9/16. Guess LarryW was right. Video of the engine running coming soon.

[arm08kn]

208tt Running

[LarryW]

Congrats!!!

Only thing I see is you might have to move your engine over to the left. Its hard to tell but looks like the drive clutches dont line up. Just something for you to take a look at.

I kind of wish my 208tt came with an engine. Pretty cool to see how its suppose to be.

Looking forward to the driveway run.

[LarryW]

Anything new?

[Amphiman1]

208tt slideable hubs....

Ok, checked my old square tubes with 7/8ths inch axles and there lugs are 3/8" fine with a 9/16th nylon lock nuts.

Steve, I dont know 2nd gen machines at all so unsure of your sliding hub.

Gee larry ask jpswift1, he saw them.....

[LarryW]

Interesting. You should get some pictures and show us what you mean!