208tt inner axle bearings...

[Amphiman1]

Anyone have a replacement bearing number /manufacturer for the inner axle bearing? 2" outer flat race, 1" long inner race with 2 set screws , 1/2" wide bearing... 1" axle

[LarryW]

Are your flanges OK or do you need the whole bearing unit? Just wondering because you can save some money if your flanges are ok and you just buy the bearing insert?

[racerone3]

if this is the guy your looking for it's FAFNIR # YA100RR. same ones in my st400.

[LarryW]

Hey Racer,
How much did those run ya? If you dont mind.
Larry

[racerone3]

i got them from motion industries. i can't remember if the inners were $12 and the outters $17 or the other way around... 7 of each came in around $180.

[JRP3]

The ones in my 295, 2 inch outer diameter 1 inch inner, were Nice 6916b. I think the "b" is for bearing only if you don't need the mounting flange. Buffalo bearings didn't have them in stock but could order them, I think they were around $24 but can't remember if that included the flange or not.http://www.6x6world.com/forums/attex...uestion-2.html

[Amphiman1]

attex inner axle bearings

found exact replacements!!!!! $19.14 each in denver, colorado nice 6916b 's

[JRP3]

Do you have a link? That's a decent price, I might want to grab a few extras.

[Amphiman1]

attex inner bearings

no link, but the number is 303-953-6760 ask for Gordy

[ericood]

Hey I just got 12 bearings for my Attex and they had ones with the flat od. I don't know if they were the correct size but I can check for you. I only paid 6.45 each and greaseable. Also years back I used rounded od and turned them down with a carbide bit in a lathe at work. I still have the tool to hold them.

[JRP3]

Do they match up to this?
RBC - Nice Ball Bearings
Specifically "bore-d" of 1 inch and "G bolt centers" of 3.25 inch, or without the flange OD of 2 inch.