First time Attex owner needs help with rebuild.

[greenlee623]

Thanks John, I will take you up on that. Your rig looks GREAT!! I don't think i will get my rig looking as good as that.

[johnedwardketch]

heyy i made a mistake on my note earlier go to the gallery page not forum to see the pics click on page 5 at bottem of page then to line 3 i think under john ketch's pics

[johnedwardketch]

heyy buddy you gott alot to do i can helpp yaa alot ive been a attex expert for over 25 yrs 400's 440's and special super chiefs redone re modified mechanically and outside cosmetics go to the forum page...under attex's the pictures scroll down to page 5 and look under the 3 colum mine will blow your mind!! how sweet it is nothing like it in the nation its under the header'' pics of john ketch two of them loaded upp on screen...a exaust system thats untouchable all stainless and titanium and back-ported dual ported jketch@optimum.net is my email personally and phone to guide or helpp yaa with stuff 619-988-4162

[greenlee623]

Hello all,
I picked up my very first Attex 6x6 I think it's a chief 400. I have been rebuilding and having fun doing it.

This is what I have done:

1. Replaced the fuel pump and filter
2. Cleaned the carb.
3. Replaced the throttle cable with a Honda FL250 Odyssey throttle cable
4. made 1 front sprocket (it was missing) with a sprocket from tractor supply
5. Replaced the front chains #50 (again tractor supply)
6. Replaced the ignition switch (again tractor supply)
7. Redid the exhaust
8. Replaced the stock rimless tires with 22/11.00-8 Stryker atv tires on 8x7 5 bolt rims (with wheel adapters)

What I need to do:

1. Fix some cracks and 1 big hole where the muffler was in the tub
2. Replace axle gaskets
3. Replace at less 1 axle
4. Make front chain tensioners
5. Replace the drive belt
6. rebuild the t20 transmission (it doesn't like to go in to reverse) maybe i can get away with just replace the shifting levers.

What I want to do:

1. Mount a winch to the front
2. Mount a 2 inch receiver hitch to the back
3. Make a split shift
4. Repaint it
5. Make a roll cage (maybe)

Any help with any of the items on my list will be greatly appreciated.



http://www.6x6world.com/gallery/show...hp?photo=28986



http://www.6x6world.com/gallery/show...hp?photo=28987

I will post more pics as I take them.