Axle removal on Superchief

[bahooy]

Thanks for the quik response I'll try it tomorrow.

[Amphiman1]

attex axles

Hi Guys new to the world of six wheelers, But I recently bought an Attex Superchief. I have a bent rear axle I'm trying to remove but having trouble getting it out. I can get it to spin inside the sprocket shaft, but it won't pull out. Am I missing something? The guy I bought it from claimed that all I had to do was pull out the bolt that goes through the axle. Any help would be appreciated! Thanks Brian

you are VERY lucky the sprocket moves.. there are 4 bolts on the bearing flange, 2 or 4 set screws on the bearings(2 on each)... then. take an old 1/2" or larger bolt, and a lfh, instead of a B.F.H, knock the axle out from the inside

[birddog1148]

On my st300d I had to pull the outer bearing.

[bahooy]

Hi Guys new to the world of six wheelers, But I recently bought an Attex Superchief. I have a bent rear axle I'm trying to remove but having trouble getting it out. I can get it to spin inside the sprocket shaft, but it won't pull out. Am I missing something? The guy I bought it from claimed that all I had to do was pull out the bolt that goes through the axle. Any help would be appreciated! Thanks Brian