Anyone ever squeeze 25's on an Attex

[SWAMP HAWG]

After seeing the hydro trax swimming with outlaws,
I would love to try a set , but smallest they come is 25x12x12
It looks like it might work if you ran really low pressure and you're not scared to break out a heat gun to give a little extra clearance.
Have any of you tried or seen 25's on an Attex?

[jpswift1]

This is certainly is a resurrection of a super old thread, but here is Hydromike's Attex 8x8 tank trainer with 25's on it. Yes it can be done and Mike tells you how in the caption.

[hydromike]

In all actuality, it's much easier than it looks. The biggest obstacle with fitting larger tires often isn't whether they'll fit under the body, it's weather they'll hit in the middle. I used a small bottle jack with a rounded body dolly on top of it. I put the bottle jack on the axle, and just slowly pressed the dolly up against the body while heating it gently with a torch. A heat gun will work just as well. Just bring it up an inch or so, cool the plastic with a wet towel, and check your fit.... At 5 psi, there is about an inch of clearance between the Rawhide IIIs. I've had no issues so far, and I test it quite hard...

~m