Super Chief Problems

[George]

Check the compression. A healthy reading of 150/jug would be good.

Try gathering up the parts to convert to CDI. Right now there are stators and external coils on ebay. The flywheel and CDI box will take a little longer to find.

[mustangwagz]

i will make a couple suggestions, as i know very little about the G50's other than alot of ppl like them. lol First id try changing your plugs...I'm sure you have a couple laying around that you can quickly throw in and try out. Its worth a shot, its easy to do. Second would be to check base settings on your carb. Being its NEW, it should be set at base settings?..however, its very well possible that it is not. Once again, i am unsure of much on your motor, so for base settings, i would either A.) check your old carb. B.) Check on here for a manual. C.) Ask the guru's about base line settings..

i MYSELF would point more towards carb settings, seeing as its "flooding" Sounds to me like maybe you got a chunk of seomthing stuck somewhere. if it Floods with engine off, id pull bowl and see whats up..something would be stuck under needle to prevent float from closing fully if thats the case. or you have a faulty float. If its only during running, id say that its set incorrectly.

However, i would highly suggest asking more ppl on the subject seeing as this is only a troubleshooting suggestion i would take to find the problem? Sorry, but i hope SOMETHING i've said helps bruce! lol

-WagZ-

[L.D.Bruce]

I might add I bought the milkuni new and used it maybe 4 hours I cleaned the plugs that have only a few hours as well I did clean the inside of the machine last week. I checked to day for lose wires but could find none. My G50B is a point system with great compression on both cylinders

[L.D.Bruce]

Today I was going to ride but my machine is flooding and running like crap with very little power. I pulled the carb a milkuni vm34mm that only has maybe 4 hours run time since I bought it. inside looked new as I would expect. I'm getting spark at both plugs it will only start at times i did run it around the yard but it lacked power any tips?