sprocket question for the attex guys

[mad_max_500cc]

on a later attex with a t-20 what is the tooth count on the axle sprockets ? i know i asked this question before but i cant find the post

[racerone3]

What specific machine? I think there were 3 possible combinations, one for the big power 2 strokes (Superchief), one for the lower power 2 strokes (295 JLO) and a 3rd for the 4 stroke Tomahawk.

[mad_max_500cc]

i was thinking big power 2 stroke. (but now im courious what all 3 are!!!!!) i was comparing total gear ratios of different t-20 equiped machines

[racerone3]

I don't own any later model Attex machines (IE: Poly body), But I can count final drive on a 295 Wild Wolf, a ST-400 (6 chain), and a tank trainer (basically a geared down ST-400) if you want me to. I don't know what any of them are tooth count wise right off the top of my head, but I know all 3 are different from each other.

[amphibious drew]

I think my tomohawk (factory 4 stroke) has 22 and its seems to me that i have seen 24 and 26 tooth maybe as well.

[mustangwagz]

i had 26 toothe on 2 fronts, then there was like 22 on 2 rear?...and the middle axle had one of each. lol

[Don]

Most of the Superchiefs that you find have 26 tooth main drive sprockets and 20 on the front. Sometimes you find one with 24 teeth main drive, but they have too much top end for most people (hang on and grit your teeth). If I remember right, the Chief and Thunderchief were 26 as well.

[mad_max_500cc]

thanks guys for all the info !!!!! i was thinking of changeing the sprockets on my jack shafts on my max2 and wanted to get some idea of what you guys run so i dont make too big of a jump in size