New members, introduce yourself here

[Kevin1]

New member

Hello I have a max iv with. Predator 670 engine. When I turn right or go cross hill with theroght side on the uphill side the thing floods. I tried new fuel pump and I tried bending the float and I got a new carb and the problem persists. Anyone have input? Thanks

[Bennett20200]

Hello, I bought a kb model last year, and I am wanting to rebuild it. I have called the Argo dealerships, and found out that all the parts are discontinued. I am excited to be able to interact with all of you, and learn about these machines! I work in the auto body repair industry so this should be fun.

There are still parts available for those KB models, depending on the year of yours you may still be able to get most of them brand new. The issue that some of the dealers run into is that a lot of the old parts have been updated and no longer use the old part numbers (axles are an example of this for your machine) and the dealers don't know where to look for the new ones. If you really want to, there's not a lot on those machines that you can't modify or replace with something you can still buy parts for, it's just a matter of how much time and skill it will take, and the $$$. I recently finished restoring my IC/Magnum machine which is just a bit newer than yours and I had no issues at all with parts. The only thing that could really hang you up in the transmission. Good luck with your restoration, I had a blast with mine!

[Charliebrown]

Hello

Hello... my name is charles and im from central ark....thx for the add... i have aquired a lockley wrangler and it is getting to be a pain.... body is fair... the last person that had it was a kid... and he put a predator 6.5hp in it... i have put a belt driven torque converter in it... and now im trying to get it ready for hunting season and today i found the rear axle bearings need replaced is their any particular place that still carriea parts or are they a common part...

[JohnH]

Hello, I bought a kb model last year, and I am wanting to rebuild it. I have called the Argo dealerships, and found out that all the parts are discontinued. I am excited to be able to interact with all of you, and learn about these machines! I work in the auto body repair industry so this should be fun.

[Fredcox]

Fred here: impulsively purchased a Buffalo Truck (ser# 19575) don’t know the year but it appears to be in great shape, with tracks and an aluminum dump bed. No idea what uses I have for it but it was good haying, pulled empty hay wagons…

[rickga]

New member here. Grew up with ATV's in the 70's in the Buffalo,NY area.
My Dad had a Scrambler and a member of Ribits Riders of WNY. Went to many ATV rallies in Ny, PA, Oh and MI. I have his old super 8 home movies I need to transfer to DVD. Been out of this hobby for many years glad to see it's alive and well.

Welcome to the site. My dad still drives his truck with the Ribits Riders decal on the side door. His name is Gil Cheney. My brother Jim, Argojim on this site, was also a member as well as several others on this site.

[rickga]

Welcome Terry. Post what you are needing help with in the max atv forum.

[markviiimark]

New member

New member here. Grew up with ATV's in the 70's in the Buffalo,NY area.
My Dad had a Scrambler and a member of Ribits Riders of WNY. Went to many ATV rallies in Ny, PA, Oh and MI. I have his old super 8 home movies I need to transfer to DVD. Been out of this hobby for many years glad to see it's alive and well.

[Terry C]

Hello everyone. My name is Terry Conner and I joined this site to try and help out my 87 year old Dad who owns a Max II 6 wheeler. I am an Army Veteran of the Vietnam Era. I have been a Volunteer Firefighter and State Certified Emergency Medical Technician in Pittsburgh, Pa. and a Volunteer Firefighter in Albright, West Virginia.

[DonnyZ]

Hi DonnyZ here I have a Max Trac IV bought new in 2013. Have added mud flaps because I couldn’t drive it without passengers getting pelted with mud. Changed out isolators that we’re torn, the back driver side was a challenge. Changed out the belt, who the hell engineered that nightmare. Have had a ball running her through mud and ponds. I joined to share my experience and maybe learn a little more for some issues a little over my head. Thanks for having me

[signtech]

69 amphicat

hi all
recently bought and had some fun ,till i broke it.....
looking for some info on the trans linkage and what the hell im looking at . lol
thing ran great but i ended up forcing the shifter and now something is broke in the trans, pulled the top off and noticed the ear on linkage from the shifter must be missing as shifter moves freely, and will not engage. looks like something fell off .i cant seem to find anything online ,and not to sure what i am looking at. any help would be apprecitaded
don
farmington nh

[Stogieman21]

Excited to own a scrambler

Hello I'm Danny im new to the AATV scene i just recently (last Saturday) purchased a 1967 scrambler gotcha i know absolutely nothing about i have been building go carts for 20 years this is a whole new animal to me it looks fun to ride after i do lots of work to it thank you for adding me im looking to join a club for these things.

[SouthernOntarioSasquatch]

Hey all,
Just purchased a 96 Bigfoot, in excellent shape with only 90 hours on it. Have already taken it for a couple day camping trip in Northern Ontario. Love how much information is available here on the forum and looking forward to picking a few other people's brains if I come up with any issues

[Hippie49]

My name is Matt I live in Washington state I recently purchased 2 6by6s aattex with Rockwell L300L init can't figure out what spark plugs fits it and a magna that's a foot shorter and total did. Transition and motor I'll fix it when the first one is done

[TeTris MoNk]

Hi everyone! My name is Kai, and I live in Sudbury, Ontario, Canada! Just picked up a 2000 Argo Bigfoot with a buddy of mine who's owned 2 newer Argos. We got this older one for hunting season as it made more sense to leave a $3000 sitting all year than a 12,000 one. Right now its all apart, waiting on new bearings/seals and potentially looking into upgrading to HD bearing adapters.