Announcement

Collapse
No announcement yet.

I finally found a 6x6 !!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • I finally found a 6x6 !!

    I bought a Maxx2 ,,she's rough but she runs and drives. Needs LOTS of TLC. She has a nice set of wheels and tires. The T20 has some shifting issues.

    It has a sweet running K440 2cyl out of a snowmobile,,38 hp. The guy I got it from , ran it up and down the street and she was very fast for a 6x6.

    I will be spending lots of time in the Maxx forum and asking Tons of questions. I don't know how to post a pic?? No matter , just think of a beat up old Maxx2 and you got it!

  • #2
    That's great. You are in for a real treat with an AATV.

    As far as the shifting issues, if you mean it's difficult to get into forward or reverse, that is normal for a T20. Just rock the machine a bit when shifting to help line up the internal cogs the shift collar must pass through. You can also give it a little throttle and bump the laterals and accomplish the same thing.

    Comment


    • #3
      Thanks. We have the top off right now so I can look it over and see where I need to start.

      Comment


      • #4
        Originally posted by dirtdobber View Post
        That's great. You are in for a real treat with an AATV.

        As far as the shifting issues, if you mean it's difficult to get into forward or reverse, that is normal for a T20. Just rock the machine a bit when shifting to help line up the internal cogs the shift collar must pass through. You can also give it a little throttle and bump the laterals and accomplish the same thing.
        a split shift setup helps a TON! 99% of the time 1 side will go into gear, then you can use that side to move slightly till the other side falls in
        A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed.

        Comment


        • #5
          Originally posted by racerone3 View Post
          a split shift setup helps a TON! 99% of the time 1 side will go into gear, then you can use that side to move slightly till the other side falls in

          I tried to reply ,,lets see if this works. I saw a video but now I can't find it.

          Comment


          • #6
            Congrats! My Max ll came with a Kawasaki 440 and was a blast...enjoy!

            Comment

            Working...
            X