Lights* Lights* Lights * Lights

[wildtexasranger]

Duckworks Aviation - RV Light Upgrades

I ordered my lights today !!!!!!!!! Been dealing with Richard (nice guy to deal with ) Phone:503-310-5946 .
I know a lot of us have been looking for brighter lights on are 6X6 in the stock locations. Well I found this place and hope this helps..
Im putting in the 4'' round lights in HOGWILD (1972 MAX II ) with the 100 watt floods.But they also have the 55W 'ChrystalWhite(TM)' Bulbs. Ill try out both. 2 lights shipped to the door $56.00. Richard tried out these for me in the ring that holds the MAX II headlights,said not much heat and after 2 hrs lit, it didnt hurt the rubber ring at all. Light fit like a glove in the ring so np there.Should be here Fri. or Mon. Ill get them in and let you see for your self what a big diff they will make. You be the judge.

[wildtexasranger]

HMMMMM

Was just wondering how many other 6X6's use the 4" round light.I think the Hustler use them, right???

[mudbug3]

wildtexasranger,


Yeah , the Hustler uses 4 inch head lights in the lower tub.

[LarryW]

Hey, goofy question here When its 4" that must be inside where the ring would be. So the outer edge is larger? I measure my scramber ones and the outside is 4.395" but the inner ring is around 4". They also fit the amphicat. And old international cub cadets too.

[wildtexasranger]

Cool!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

So looks like these lights will fit a lot of 6X6 just as I had hoped.. Im not sure what the attex takes I think 5 3/4 Well if your looking for lights for them JcWhitney has an Halogen conversion kit PART # BAP495316 for 40 $ a pair that you can put the Xenon bulds in that only use 4 amps to work.
Im not sure about the MAX 4 but Im thinking 6 1/2 x 4 That Part # to convert is BAP495314 both are made by PILOT LIGHTS. so if anyone knows the size in an ATTEX & A MAX 4 speak up. this im sure will help so folks out in the long run..

[LarryW]

Yea, attex are larger then amphicat and scrambler. There faster and need better vision. Just kidding.

[wildtexasranger]

LOL

[swamp witch]

So looks like these lights will fit a lot of 6X6 just as I had hoped.. Im not sure what the attex takes I think 5 3/4 Well if your looking for lights for them JcWhitney has an Halogen conversion kit PART # BAP495316 for 40 $ a pair that you can put the Xenon bulds in that only use 4 amps to work.
Im not sure about the MAX 4 but Im thinking 6 1/2 x 4 That Part # to convert is BAP495314 both are made by PILOT LIGHTS. so if anyone knows the size in an ATTEX & A MAX 4 speak up. this im sure will help so folks out in the long run..

That's the shot.Light technology has come a long way.Far less power and a lot brighter.

[MikeyM]

Hey these are the same lights I found the other day, does anyone have any pics on how they fit in the ring of the maxII? If I knew these fit well, i'll order them right away!