What's the drain plug/hole supposed to look like?

[dirtdobber]

Hey guys,

My 950 has a semi-rough cut hole, in the back wall of the tub, that is about 1 in or so in diameter, with the bottom of the hole right against the bottom of the tub. Is this the original way hustler provided for the drain? What type of plug did it use?

If someone has any pics of what it is supposed to be I would appreciate a post.

Thanks in advance.

[racerone3]

Yep, that sounds about right. I use this from the inside out. Sea Dog Snap Handle Drain Plug, No Safety Chain, Brass, Bulk - Walmart.com

[dirtdobber]

Frame 2.jpgI take it you an access your from the inside out. I think when I get mine all back together, the drain hole will actually be under that rear portion of the frame cross member (circled in red).

I hate to put it in from the outside because it will catch all kinds of junk and likely get snatched out. Maybe I can us an expansion plug or something similar that will be pretty flat on the outside

[racerone3]

it will be directly under that. its a pita, but you can get there