Announcement

Collapse
No announcement yet.

Keyed axles

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Keyed axles

    Contemplating axle options for a Hustler build. Have saw a couple of builds that used 1.25 inch keyed axles, Meinfield's comes to mind. Did not see how the wheel hubs were installed. I suppose they probably welded them on, but am wondering if a keyed wheel hub would work since I currently lack a welder?
    Lug
    Tags: None
  • #2
    lug .. i have 1 1/2 '' axles keyed with keyed hubs on my max 2 . they have had no problems for 2 years . but on my design , i welded the original 1 1/4 '' hub to a 1 1/2 '' keyed shaft coupler. i also put a 1 1/2'' split collar on the axle next to the coupler and welded one half of the collar to the hub , then clamped it down on the axle for some extra '' grip ''. if you have a 1 1/2 '' keyed hub on a keyed axle it should work . if the hub only attaches to the axle with a key and a allen set screw , you may need to drill a hole thru the hub and axle for a tight connection. hope this helps , johnboy va.

    Comment

    • #3
      John,
      Just found your build pics for the high boy Max and now know how you are able to run 1.5 axles. How has that set up worked out for you? I am in Alaska and would be using mine in some pretty rough country with marshy areas and stream crossings. After looking at your pictures I had visions of making a 8x8 subframe. Might have to do some photochopping once the snow and mud in the backyard goes away.
      Lug

      Comment

      • #4
        lug...i've run this machine over 2 years with the subframe design and for me it works great . easier to work on the chains and bearings , etc. than down in the tub. easy to keep them clean , oiled and greased . same bearings for all this time . i run # 60 chains with adjustable bearing mounts which eliminates the tensioners. it has added overall weight , but with the 23 h.p. briggs there is plenty of power . i have pretty much worked out every design challenges so if anyone builds one i can give some pointers . the few videos of the build show the basic fabrication procedures. keep in touch.....johnboy va.

        Comment

        • #5
          Johnboy va,
          I found your videos of the Mk. II rebuild of you Max. That turned out nice. Are you still running without any chain covers?
          Lug

          Comment

          Previous template Next
          Working...
          X