back

[klogtruck]

hey guys. been a while. got an axle that i'm not sure how to get out. been in the how to's and it's good info but i think i have some rare bearings (not sure if that's right spelling) but here they are. this is the inner and this is the outer. any help would be very helpfull.

[Mike]

It just looks like you are missing the lock collar on the outer bearing. You should remove the set screws from the inner bearing and rotate the lock collar off. Then you "should" be able to pull the axle out. However with that much rust you are probably going to have a hard time.

If it doesn't come out easily, remove the bolts that hold the bearing in place. Then pull the axle and bearing out a few inches. That way you can get to the inner bearing and cut it off. Once off you can pull the whole axle out and tackle the outer bearing.

Have fun

[klogtruck]

thanks mike i'll try that. i'll let you know if it works. sorry i've been away so long but hard times fall. so anyhow i'm back on this thing and going to see if maybe i can get it going for the spring.