Hustler model?

[KIKKERJOHN]

Can anyone tell me how to identify which Hustler model I have?

[hydromike]

Hi john,

I don't think we've seen pictures of your machine yet. Post some pictures in the gallery and we'll help you out.

[amphibious drew]

Hi john,

I don't think we've seen pictures of your machine yet. Post some pictures in the gallery and we'll help you out.

That always helps. If you have trouble getting pics, you could describe it, ie: body material, engine, tire size and amount of extra space between the tub and tires. Fiberglass is going to be an earlier model like an 880, poly starts with the 900, the 950 is a bit beefier with a little better frame, and the 980 is the holy grail with a real deep tub. Jpswift can usually tell what model by hearing what engine is in it.

[KIKKERJOHN]

Just got home-I do have pics I just need to figure out how to post but let me describe it in the mean time.
Poly body-Yellow Kohler K341 16 hp-Tire Size 22x12.5-8 Not sure where to measure the amount of extra space between the tub and tires?
I got the rig in pieces & need an assembly drawing for the sprockets-Help!
Got engine rebuilt & am ready for the drive drain-Thanks!

[amphibious drew]

Its probably a 950. They came with a Briggs and a kohler I believe as well as the21's. The 900 had a 2 stroke in it and the 980 would look ridiculous with such small tires on it. I don't know what the 945hk or whatever has in it.

[KIKKERJOHN]

Ok-just loaded some pics of my hustler-help me out guys!i am counting on you-

[jpswift1]

It's a late 70's or early 80's Hustler 950 since it has the Kohler K341 16HP single cylinder 4 stroke.

[azz7772]

I will put one of your picks up here for youhttp://www.6x6world.com/gallery/memb...-model-3f.html

[KIKKERJOHN]

Thanks everybody!
I have a 950-now can anyone send me pics of the chain & sprocket assembly araingment?
Or where can i got to get the info?

[amphibious drew]

Look in the gallery under the hustler section. Dan67 probably has some pictures that will point you in the right direction. they will only line up one way I believe so if it doesn't look right it isn't.

[Dan67]

Look in the gallery under the hustler section. Dan67 probably has some pictures that will point you in the right direction. they will only line up one way I believe so if it doesn't look right it isn't.

Thanks for the plug Drew. I have a hard time remember some stuff so I tend to take allot of pictures so I know where I'm at and what I've done. Photo documentation is my friend.

I found some older pics that can help you out. I have been off and on again rebuilding my 1984/85? Hustler 950 into a 980 body.

Middle sprockets..

Rear sprockets..

Front sprockets.. I don't have a really good picture. But that's not a problem, Raceone3 has a good picture of the sprockets when he rebuilt his 950.

[KIKKERJOHN]

Help!hustler 950 sprocket/chain layout

Trying to get my Hustler back together-Went to Dan 67-could not find any pics-Would a fellow Hustler Owner do me a kindness & posts some pics?